Chassis-Cab + Box Ambulance / Type IIIAdvanced Life Support / Basic Life Support

Chassis Cab + Box ALS / BLS

Chassis cab ambulance with box body for non-EN 1789 international standards. Design and equipment for basic or advanced life support.

KEY FEATURES

Cutting-Edge Technology
CARLA 4.0 Touch Control The CAN BUS function control system via touch screens is a value-added option for Type III ambulances. The cab (7-inch) and patient area (10-inch) interfaces can be supplemented with MMI controls (4.3-inch) in any location. The electronics are custom-programmed according to the specifications of each conversion. Discover CARLA 4.0
Next-Generation Emergency Signaling
RLAJ5 Available for both RLA Slim and RLA standard box bodies, the RLAJ5 integral roof spoiler is equipped with high-efficiency RLA FL6 strobes distributed across the entire upper perimeter of the vehicle. On the sides and rear area, the optics are integrated into the box. For the cab area, a roof fairing has been developed that significantly improves aerodynamics and incorporates five optics at various levels. The result is a vehicle with an integral body and a continuous surface, providing 360º visibility.
Ergonomic Space
Treatment Area The combined use of a stretcher support with lateral/longitudinal displacement, together with the versatile range of RLA seats, allows for patient care from any position. Lateral swivel seats can be oriented towards the stretcher or in the direction of travel. Longitudinal displacement or the head-end seat on rails allows for distance adjustment for optimal care. If airline-style floor tracks are chosen for the stretcher support and seats, the configuration can be modified according to service needs.
Electromedical Equipment Wall
Rail-Mounted Supports Electromedical devices are installed on sliding rail-mounted brackets. This allows each element to be placed in the optimal position. The system accommodates original brackets or custom-made supports by RLA. The rails are complemented by strategically located power and oxygen outlets, as well as LED lighting bars. Read more
Customized Solutions
Custom-Built Design A multidisciplinary team of engineers is assigned to every individual project or large-fleet prototype. Every detail of the ambulance is defined together with the client, including box body dimensions and door configuration. Supported by the extensive machinery available at our facilities, the R&D Departments can develop and manufacture the innovative solutions required by the specifications. RLA Facilities
Second Stretcher
3 / 4 Seater Bench As an option for when it is necessary to transport more than one patient, the three or four-seater bench, equipped with a backrest and three-point seat belts, can be converted into a second stretcher when the main one is in use. The bench itself incorporates a support for a spine board that can be placed over the seat with the patient secured on top. The dual function of the seat belts allows the assembly to be fastened for safe transport. Read more
RLA Box Structure
Aluminum Profiles The box body for chassis cabs is designed to offer a robust and lightweight solution. Manufactured using high-quality aluminum profiles, this box is significantly lighter (around 30%) than traditional steel models without compromising strength or durability, featuring high resistance to corrosion and wear. The use of these profiles in all door frames ensures a perfect fit, with no gaps or misalignments.
Comfortable Patient Area
Thermal and Acoustic Insulation The box body uses sandwich panels with thermal and acoustic insulation consisting of polyester plates and a core, bonded with a two-component polyurethane adhesive. Aluminum structures are integrated into the core to achieve the structural strength required for the bodywork. This ensures the medical compartment remains free from external noise, staying below 77 dB(A) at 120 km/h (compliant with European Standard EN 1789).
Seamless Finish
Full interior lacquering, joint sealing The interior lacquering applied to the entire furniture structure seals all joints and prevents the filtration of liquids and small particles. The disinfection of the ambulance is much more effective, and the finish is resistant to continuous cleaning. Read More
Non-Slip Waterproof Technical Floor
Sprayed epoxy coating An epoxy coating is sprayed over the entire floor, reaching a minimum height of 5 cm on the skirting. This creates a watertight, non-slip ambulance base that is easy to disinfect. Read more
Direct Lighting
Interior Ceiling LED bars along the entire ceiling provide illumination for the entire medical compartment. Adjustable cool-light spotlights on the ceiling target specific areas to assist medical technicians. The luminosity in the treatment area exceeds 1,650 lx, and the color temperature ranges between 3,800 K and 4,300 K, in compliance with Standard EN 12464-1:2011. Read more
Reliable Materials
Antibacterial, water-resistant and flame-retardant To enhance safety, interior flame-retardant materials are used in accordance with Standard ISO 3795:1989. The use of plastic board or MDF, together with the interior surface finish of the floor, furniture, and ceiling, results in a water-resistant structure that prevents the accumulation of pathogens.
270º Opening
Rear Doors To improve patient safety and ergonomics for technicians, a full-opening rear door system has been developed with the option to lock at 270º and 90º. This facilitates the loading and unloading of the stretcher by providing more space around the entire rear area, making it easier to load standard stretchers, bariatric stretchers, incubator systems, or systems for ECMO patients, among others.
Sliding Door
Side sliding door As an alternative to hinged doors with or without gas struts, the exterior sliding door system developed by RLA for one or both sides of the box body integrates the central rail mechanism outside the vehicle without exceeding the width of the mirrors. This results in an increase in interior space without affecting the exterior dimensions. Like all other doors, they are integrated into the original central locking system of the vehicle.
Equipamiento de acción
Puertas Exteriores Gracias a las dimensiones de la caja, resulta muy práctico ocupar parte del espacio con material de acción fácilmente accesible desde el exterior del vehículo para situaciones de intervención rápida. El equipo también puede ser accesible desde el interior mediante frentes abatibles del mobiliario.
Response Equipment
Exterior Doors Thanks to the dimensions of the box body, it is highly practical to utilize part of the space for response equipment that is easily accessible from the outside of the vehicle for rapid intervention situations. The equipment can also be accessed from the interior via fold-down furniture panels.

A WORLD OF POSSIBILITIES

Technical Data

MERCEDES-BENZ Sprinter Chassis Cab
MAN TGE Chassis Cab
RENAULT Master Chassis Cab
RENAULT Maxity Chassis Cab
PEUGEOT Boxer Chassis Cab
IVECO DAILY 4x4 Chassis Cab
Other Brands Inquire  
Technical Sheet Coming Soon